Installation Instructions for THE-REMOTE Antenna Extension

1. Remove Existing antenna from THE-REMOTE

2. Attach extended antenna cable adapter “B” into The- Remote finger tight

3. Route 36” cable “A” to side of feeder and attach to Feeder apparatus using cable clamp “D” and screw “E”. Route cable A in a manner to prevent kinking of the cable.

4. Mount stand-off bracket “C” as high as possible to side of feeder facing stand or operator position

5. Attach the top end antenna cable “A” to stand off bracket “C” using clamp “D” and screw “E”

NOTE:

5/16” hex driver (not included) is required for screws “E”